Comparative study of three novel ion exchange resins with DEAE-cellulose for the purification of Trypanosoma evansi.

Ion exchange chromatography is a method that uses the different surface charges of trypanosomes and blood cells to separate them. This makes it possible to use molecular and immunological methods to diagnose or study these protozoans. DEAE-cellulose resin is commonly used to perform this method. The goal of this study was to compare three novel chromatographic resins designated as PURIFICA™ (Y-C2N®, Y-HONOH®, and Y-CNC3®). The resins were evaluated based on their ability to isolate the parasite, purification time, examination of parasite viability and morphology, and trypanosome recovery potential after passing through the columns. In terms of the evaluated parameters, there was no significant difference between DEAE-cellulose and the three tested resins in most experiments. However, PURIFICA™ (Y-C2N®, Y-HONOH®, and Y-CNC3®) resins are less expensive and easier to prepare than DEAE-Cellulose, making them an alternative for the purification of Trypanosoma evansi.

Properties of cell wall polysaccharides of raw nectarine fruits after treatment under conditions that modulate gastric digestion.

The results of the study of the physicochemical properties of the high-molecular-weight soluble and insoluble components of nectarine cell walls obtained by fruit treatment under conditions that modulate of gastric digestion are presented. Homogenized nectarine fruits were sequentially treated by natural saliva and simulated gastric fluid (SGF) at pH 1.8 and 3.0. The isolated polysaccharides were compared with polysaccharides obtained by sequential extraction of nectarine fruit with cold, hot, and acidified water, solutions of ammonium oxalate and sodium carbonate. As a result, high-molecular-weight water-soluble pectic polysaccharides, weakly bound in the cell wall, were dissolved in the simulated gastric fluid, regardless of pH. Homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) were identified in all pectins. It was shown that their quantity and ability to form highly viscous solutions determine high values of the rheological characteristics of the nectarine mixture formed under simulated gastric conditions. The modifications occurring with the insoluble components under the influence of acidity of SGF were importance. They determined difference in the physicochemical properties of both the insoluble fibres and the nectarine mixtures.

Polysaccharides from Hericium erinaceus Fruiting Bodies: Structural Characterization, Immunomodulatory Activity and Mechanism.

Five fractions from crude Hericium erinaceus polysaccharides (HEPs), including HEP-1, HEP-2, HEP-3, HEP-4 and HEP-5, were obtained through column chromatography with a DEAE Cellulose-52 column and Sephadex G-100 column. The contents of total carbohydrates and uronic acid in HEPs were 53.36% and 32.56%, respectively. HEPs were mainly composed of Fuc, Gal and Glu in a molar ratio of 7.9:68.4:23.7. Its chemical structure was characterized by sugar and methylation analysis, along with 1H and 13C NMR spectroscopy. HEP-1 contains the backbone composed of (1→6)-linked-galactose with branches attached to O-2 of some glucose. The immunological activity assay indicated that HEP-1 significantly promoted the production of nitric oxide, interleukin-6, interleukin-10, interferon-γ and tumor necrosis factor-α and the phosphorylation of signaling molecules. Collectively, these results suggested that HEP-1 could improve immunity via NF-κB, MAPK and PI3K/Akt pathways. Hericium erinaceus polysaccharides might be explored as an immunomodulatory agent for use in dietary supplements.

Production of cold-active pectinases by three novel Cladosporium species isolated from Egypt and application of the most active enzyme.

Cladosporium parasphaerospermum, Cladosporium chlamydosporigenum, and Cladosporium compactisporum have all been discovered and characterized as new Cladosporium species. The three new species seemed to generate cold-active pectinases with high activity at pH 6.0 and 10 °C, pH 6.0 and 15 °C, and pH 5.0 and 15 °C, respectively, with the most active being C. parasphaerospermum pectinase. In submerged fermentation (SmF), C. parasphaerospermum produced the most cold-active pectinase with the highest activity and specific activity (28.84 U/mL and 3797 U/mg) after 8 days. C. parasphaerospermum cold-active pectinase was isolated using DEAE-Cellulose anion exchange resin and a Sephadex G 100 gel filtration column. The enzyme was purified 214.4-fold and 406.4-fold greater than the fermentation medium using DEAE-cellulose and Sephadex G 100, respectively. At pH 7.0 and 10 °C, pure pectinase had the highest activity (6684 U/mg), with Km and Vmax determined to be 26.625 mg/mL and 312.5 U/min, respectively. At 5 mM/mL, EDTA, MgCl2, and SDS inhibited the activity of pure pectinase by 99.21, 96.03, and 94.45%, respectively. The addition of 10 U/mL pure pectinase enhanced the yield of apple, orange, apricot, and peach juice by 17, 20, 13, and 24%, respectively, and improved the clarity and colour of orange juice by 194 and 339%, respectively. We can now add cold-active pectinase production to the long list of Cladosporium species that have been identified. We also report three new species that can be used in biotechnological solutions as active microbial pectinase producers. Although further research is needed, these distinct species might be used to decompose difficult and resistant pertinacious wastes as well as clear fruit juices.

Purification and characterization of chitinase produced by thermophilic fungi Thermomyces lanuginosus.

BACKGROUND: In the past few years, the production of shrimp shell waste from the seafood processing industries has confronted a significant surge. Furthermore, insignificant dumping of waste has dangerous effects on both nature and human well-being. This marine waste contains a huge quantity of chitin which has several applications in different fields. The chitinase enzyme can achieve degradation of chitin, and the chitin itself can be used as the substrate as well for production of chitinase. In the current study, the chitinase enzyme was produced by Thermomyces lanuginosus. The extracellular chitinase was purified from crude extract using ammonium sulfate precipitation followed by DEAE-cellulose ion-exchange chromatography and Sephadex G-100 gel filtration chromatography. The stability and activity of chitinase with different pH, temperature, different times for a reaction, in the presence of different metal ions, and different concentration of enzyme and substrate were analyzed. RESULT: The chitinase activity was found to be highest at pH 6.5, 50 °C, and 60 min after the reaction began. and the chitinase showed the highest activity and stability in the presence of ß-mercaptoethanol (ME). The SDS-PAGE of denatured purified chitinase showed a protein band of 18 kDa. CONCLUSION: The characterization study concludes that Cu2+, Hg2+, and EDTA have an inhibitory effect on chitinase activity, whereas ß-ME acts as an activator for chitinase activity. The utilization of chitin to produce chitinase and the degradation of chitin using that chitinase enzyme would be an opportunity for bioremediation of shrimp shell waste.

Biofabrication of skin tissue constructs using alginate, gelatin and diethylaminoethyl cellulose bioink.

INTRODUCTION: Biofabrication of skin tissue equivalents using 3D bioprinting technology has gained much attention in recent times due to the simplicity, the versatility of the technology and its ability in bioengineering biomimetic tissue histology. The key component being the bioink, several groups are actively working on the development of various bioink formulations for optimal skin tissue construction. METHODS: Here, we present alginate (ALG), gelatin (GEL) and diethylaminoethyl cellulose (DCEL) based bioink formulation and its application in bioprinting and biofabrication of skin tissue equivalents. Briefly, DEAE cellulose powder was dispersed in alginate solution with constant stirring at 60 °C to obtain a uniform distribution of cellulose fibers; this was then mixed with GEL solution to prepare the bioink. The formulation was systematically characterized for its morphological, physical, chemical, rheological, biodegradation and biocompatibility properties. The printability, shape fidelity and cell-laden printing were assessed using the CellInk bioprinter. RESULTS: The bioink proved to be a good printable, non-cytotoxic and stable hydrogel formulation. The primary human fibroblast and keratinocyte-loaded 3D bioprinted constructs showed excellent cell viability, collagen synthesis, skin-specific marker and biomimetic tissue histology. CONCLUSION: The results demonstrated the successful formulation of ALG-GEL-DCEL bioink and its application in the development of human skin tissue equivalents with distinct epidermal-dermal histological features.

Stabilization of Glycosylated ß-Glucosidase by Intramolecular Crosslinking Between Oxidized Glycosidic Chains and Lysine Residues.

Many industrial enzymes can be highly glycosylated, including the ß-glucosidase enzymes. Although glycosylation plays an important role in many biological processes, such chains can cause problems in the multipoint immobilization techniques of the enzymes, since the glycosylated chains can cover the reactive groups of the protein (e.g., Lys) and do not allow those groups to react with reactive groups of the support (e.g., aldehyde and epoxy groups). Nevertheless, the activated glycosylated chains can be used as excellent crosslinking agents. The glycosylated chains when oxidized with periodate can generate aldehyde groups capable of reacting with the amino groups of the protein itself. Such intramolecular crosslinks may have significant stabilizing effects. In this study, we investigated if the intramolecular crosslinking occurs in the oxidized ß-glucosidase and its effect on the stability of the enzyme. For this, the oxidation of glycosidic chains of ß-glucosidase was carried out, allowing to demonstrate the formation of aldehyde groups and subsequent interaction with the amine groups and to verify the stability of the different forms of free enzyme (glycosylated and oxidized). Furthermore, we verified the influence of the glycosidic chains on the immobilization of ß-glucosidase from Aspergillus niger and on the consequent stabilization. The results suggest that intramolecular crosslinking occurred and consequently the oxidized enzyme showed a much greater stabilization than the native enzyme (glycosylated). When the multipoint immobilization was performed in amino-epoxy-agarose supports, the stabilization of the oxidized enzyme increases by a 6-fold factor. The overall stabilization strategy was capable to promote an enzyme stabilization of 120-fold regarding to the soluble unmodified enzyme.

Structure analysis of polysaccharides purified from Cyclocarya paliurus with DEAE-Cellulose and its antioxidant activity in RAW264.7 cells.

CPP was isolated from Cyclocarya paliurus (C. paliurus) and CPP-D was purified from CPP with a further step by DEAE-Cellulose. In this study, the structure and antioxidant activities of these two polysaccharides were investigated. The molecular weight of CPP was determined as 1.15 × 105 Da and the monosaccharides of it were Rha, Ara, Xyl, Man, Glc, Gal in a molar ratio of 0.021:0.237:0.020:0.036:0.454:0.231, while the molecular weight of CPP-D was 9.1 × 103 Da and the monosaccharides of it were Man, Glc, Gal in a molar ratio of 0.235:0.677:0.088. CPP-D consisted of three structural residues →4)-ß-D-Glc-(1→, →2,6)-ß-D-Man-(1→ and →4)-ß-D-Gal. These structures were characterized by SEM, FT-IR, GC-MS, HPGPC, and NMR. The antioxidant assay in RAW264.7 cell showed that both CPP and CPP-D promoted cell viability and antioxidant activity, which decreased the content of MDA and increased the activity of SOD, T-AOC, CAT (P < .05). As a result, CPP-D isolated by DEAE-Cellulose didn't reduce the antioxidant activity of C. paliurus polysaccharide and could enhance the cell viability.

Structural characterization and induced copper stress resistance in rice of exopolysaccharides from Lactobacillus plantarum LPC-1.

Excessive accumulation of copper could decrease growth and quality of crops, and little information was currently available on the role of exopolysaccharides (EPS) from Lactobacillus plantarum in inducing copper stress resistance in plants. The main objective of this work was to purify and characterize the EPS produced by our isolated L. plantarum LPC-1, and evaluate its potential protection for rice against copper stress. Firstly, two fractions (EPS-1 and EPS-2) were separated and purified from L. plantarum LPC-1 by DEAE-52 cellulose and Sephadex G-100 cellulose column chromatography. According to the further scanning electron microscope (SEM), ultraviolet-visible (UV), fourier-transform infrared spectroscopy (FTIR) spectroscopy and gas chromatography (GC) analyses, it was observed that EPS-1 and EPS-2 were heteropolysaccharides that were composed of mannose and glucose with molar ratio of 2.40:15.01 and 3.02:11.63, respectively. Additionally, the two fractions possessed considerable antioxidant activities, and EPS-1 had a stronger antioxidant activity than EPS-2 in vitro. Furthermore, exogenous addition of EPS significantly alleviated the toxic effects by copper on rice seedlings. In conclusion, this study provided evidence of the EPS-mediated reduction of copper toxicity in rice seedlings at physiological and biochemical levels, suggesting that EPS could be considered as novel and effective plant immune inducers in crops.

Chemical structure and inhibition on α-glucosidase of polysaccharide with alkaline-extracted from glycyrrhiza inflata residue.

A new neutral polysaccharide, named AGP, was extracted from glycyrrhiza residue by 5% NaOH alkaline solution and purified by DEAE-celluloseand Sephadex G-150. A single and symmetrical peak was shown by HPLC, indicating that AGP is a homogeneous polysaccharide with a molecular weight of 2.89 × 103 KDa. Thespecific rotation of AGP was detected by a polarimeter and it was +45°. Monosaccharide composition analysis indicated that AGP was consisted of l-rhamnose: l-arabinose: d-xylose: d-mannose: d-glucose and d-galactose with a molar ratio of 1:2.33:2.85:0.69:3.05:1.54. The structure of AGP was analyzed by GC-MS, periodate oxidation, Smith degradation, FT-IR, methylation and NMR, which indicated that the AGP was composed of → 6)-ß-d-Glcp-( â†’ backbone and the â†’4)-α-d-Xylp-(1→, →5)-α-l-Araf-(1→, →3)-α-l-Rhap-(1→, →6)-α-d-Galp-(1→, →3,6)-α-Manp-(1→ and →1)-ß-d-Glcp as branches. The results of Congo red experiment and circular dichroism (CD) showed that there was triple helix conformation in AGP. The micro-structure of AGP were detected by scanning electron microscopy (SEM), which concluded that the shape of AGP was a "thin slice" and its structure is not regular. The crystal configuration was identified by X-ray diffraction (XRD), showing that there is no crystal structure. Furthermore, the AGP exhibited certain inhibition activity on α-glucosidase.

Fabrication and evaluation of carboxymethylated diethylaminoethyl cellulose microcarriers as support for cellular applications.

Cellulose based microcarriers can be used in biomedical science as supports for cell adhesion and proliferation. However, to facilitate cell attachment to their surface, they require appropriate functional surface charge. Cell function such as adhesion and growth is increased on the modified surfaces with cationic and anionic groups. In this research, diethylaminoethyl cellulose was carboxymethylated to produce soluble multifunctional cellulose with simultaneous presence of cationic and anionic functional groups. Then, carboxymethylated diethylaminoethyl cellulose (CM-DEAEC) were produced by ionic crosslinking. Various instrumental techniques were applied to characterize the microcarriers. Biological tests were also performed to determine cell seeding efficiency, proliferation and attachment on microcarriers. Fabricated CM-DEAEC microcarriers had 1500-1800 µm diameter, +26.0 surface potential, 376% swelling behavior and 233 °C glass transition temperature respectively. The findings showed that CM-DEAEC microcarriers support cellular attachment and proliferation very well and hence are promising materials for cell therapy and tissue engineering applications.

Purification of Extracellular Trypanosomes, Including African, from Blood by Anion-Exchangers (Diethylaminoethyl-cellulose Columns).

This method allows the separation of trypanosomes, parasites responsible for animal and human African trypanosomiasis (HAT), from infected blood. This is the best method for diagnosis of first stage HAT and furthermore this parasite purification method permits serological and research investigations. HAT is caused by Tsetse fly transmitted Trypanosoma brucei gambiense and T. b. rhodesiense. Related trypanosomes are the causative agents of animal trypanosomiasis. Trypanosome detection is essential for HAT diagnosis, treatment and follow-up. The technique described here is the most sensitive parasite detection technique, adapted to field conditions for the diagnosis of T. b. gambiense HAT and can be completed within one hour. Blood is layered onto an anion-exchanger column (DEAE cellulose) previously adjusted to pH 8, and elution buffer is added. Highly negatively charged blood cells are adsorbed onto the column whereas the less negatively charged trypanosomes pass through. Collected trypanosomes are pelleted by centrifugation and observed by microscopy. Moreover, parasites are prepared without cellular damage whilst maintaining their infectivity. Purified trypanosomes are required for immunological testing; they are used in the trypanolysis assay, the gold standard in HAT serology. Stained parasites are utilized in the card agglutination test (CATT) for field serology. Antigens from purified trypanosomes, such as variant surface glycoprotein, exoantigens, are also used in various immunoassays. The procedure described here is designed for African trypanosomes; consequently, chromatography conditions have to be adapted to each trypanosome strain, and more generally, to the blood of each species of host mammal. These fascinating pathogens are easily purified and available to use in biochemical, molecular and cell biology studies including co-culture with host cells to investigate host-parasite relationships at the level of membrane receptors, signaling, and gene expression; drug testing in vitro; investigation of gene deletion, mutation, or overexpression on metabolic processes, cytoskeletal biogenesis and parasite survival.

Structure elucidation and bioactivities of a new polysaccharide from Xiaojin Boletus speciosus Frost.

A new water-soluble polysaccharide named BSF-X was extracted and purified from the fruiting bodies of Boletus speciosus Frost which had a molecular weight of 141,309 Da. The structure identification results showed that BSF-X was mainly composed of ß-d-glucose and α-D-galactose. BSF-X had a backbone of 1, 4-linked ß-d-glucose of which branches were mainly composed of two 1, 6-linked α-D-galactose residue and a 4-linked ß-d-glucose at the end of the branches. Antitumor activities results showed that BSF-X could inhibit the proliferation of L929 cells in vitro and S180 tumor cells in vivo. Immunoregulatory activities results showed that BSF-X could promote the proliferation of T cells, B cells and macrophages by promoting the cells into S phase from G0/G1 phase. Polysaccharide BSF-X can also enhance the phagocytes is and cytokine secretion of macrophages. This study introduced the new polysaccharide BSF-X as a valuable source which exhibit unique antitumor and immunoregulatory properties.

Physicochemical properties and cell-based bioactivity of Pu'erh tea polysaccharide conjugates.

Polysaccharide conjugates were prepared from Pu'erh tea and fractionated by DEAE-cellulose DE-52 column chromatography to yield one unexplored polysaccharide-conjugate fraction termed TPC-P with a molecular weight of 251,200Da. DVS (dynamic vapour sorption) result discovered that the humidity condition of long-term preservation for TPC-P is below 70% RH. Although it contained proteins, TPC-P could not bind to the Coomassie Brilliant Blue dyes G250 and R250. The "shoulder-shaped" ultroviolet absorption peak in TPC-P UV-vis scanning spectum ascribe theabrownins that inevitably adsorbed the polysaccharide conjugate. Zeta potential results demonstrated TPC-P aqueous solution merely presented the negative charge properties of polysaccharides instead of acid-base property of its protein section, and had more stability in greater than pH 5.5. No precipitation or haze occurred in the three TPC-P/EGCG aqueous mixtures during their being stored for 12h. The phase separation was observed in aqueous mixtures of TPC-P and type B gelatin. TPC-P possessed the fine stability as a function of temperature heating and cooling between 0 and 55°C. It is proposed that some properties of the covalent binding protein of TPC-P were "shielded" by its polysaccharide chains.

Isolation and Characterization of a Phaseolus vulgaris Trypsin Inhibitor with Antiproliferative Activity on Leukemia and Lymphoma Cells.

A 17.5-kDa trypsin inhibitor was purified from Phaseolus vulgaris cv. "gold bean" with an isolation protocol including ion exchange chromatography on DEAE-cellulose (Diethylaminoethyl-cellulose), affinity chromatography on Affi-gel blue gel, ion exchange chromatography on SP-sepharose (Sulfopropyl-sepharose), and gel filtration by FPLC (Fast protein liquid chromatography) on Superdex 75. It dose-dependently inhibited trypsin with an IC50 value of 0.4 µM, and this activity was reduced in the presence of dithiothreitol in a dose- and time-dependent manner, signifying the importance of the disulfide linkage to the activity. It inhibited [methyl-³H] thymidine incorporation by leukemia L1210 cells and lymphoma MBL2 cells with an IC50 value of 2.3 µM and 2.5 µM, respectively. The inhibitor had no effect on fungal growth and the activities of various viral enzymes when tested up to 100 µM.

Purification and characterization of alginate lyase from locally isolated marine Pseudomonas stutzeri MSEA04.

An alginate lyase with high specific enzyme activity was purified from Pseudomonas stutzeri MSEA04, isolated from marine brown algae. The alginate lyase was purified by precipitation with ammonium sulphate, acetone and ethanol individually. 70% ethanol fraction showed maximum specific activity (133.3 U/mg). This fraction was re-purified by anion exchange chromatography DEAE- Cellulose A-52. The loaded protein was separated into 3 peaks. The second protein peak was the major one which contained 48.2% of the total protein recovered and 79.4% of the total recovered activity. The collected fractions of this peak were subjected to further purification by re-chromatography on Sephadex G-100. Alginate lyase activity was fractionated in the Sephadex column into one major peak, and the specific activity of this fraction reached 116 U/mg. The optimal substrate concentration, pH and temperature for alginate lyase activity were 8 mg/ml, pH 7.5 and 37 °C, respectively. While, Km and Vmax values were 1.07 mg alginate/ ml and 128.2 U/mg protein, respectively. The enzyme was partially stable below 50 °C, and the activity of the enzyme was strongly enhanced by K(+), and strongly inhibited by Ba(+2), Cd(+2), Fe(+2) and Zn(+2). The purified enzyme yielded a single band on SDS-PAGE with molecular weight (40.0 kDa).

SHG10 keratinolytic alkaline protease from Bacillus licheniformis SHG10 DSM 28096: Robust stability and unusual non-cumbersome purification.

Present study underlines an unusual non-cumbersome-powerful strategy for purification of SHG10 keratinolytic alkaline protease from Bacillus licheniformis SHG10 DSM 28096 with robust stability properties. The enzyme was impressively purified to homogeneity with specific activity, purification fold, and yield of 613.82 U mg-1 , 58.91 and 99%, respectively, via a sequential two-step purification strategy: precipitation with 65% (NH4 )2 SO4 and flow through fractions of DEAE-cellulose DE 53 column. SDS-PAGE conferred a monomeric enzyme with a molecular mass of 30.4 kDa. The enzyme demonstrated optimal activity at pH (10.0-11.0) and at 65 °C. It exhibited full stability at pH (6.0-11.0) over 38 h at 4 °C and at 65 °C for 15 min. Remarkable enhanced enzyme activity (130.15 and 126.37%) was retained in presence of commercial laundry detergents Oxi and Ariel after 1 h, respectively. Organic solvent stability of the enzyme was verified in butanol, ether, acetonitrile, isopropanol, and chloroform. Imposingly, full storage stability (100%) of the enzyme along 1 year in -20 °C was confirmed. Km -Vmax was 0.00174 mM-534.2 mM Sub · min-1 · mg protein-1 and 1.266 mg-28.89 mg Sub · h-1 · mg protein-1 on N-Suc-Ala-Ala-Pro-Phe-pNA and keratin azure, respectively. Robust stability properties of SHG10 keratinolytic alkaline protease along with rapid-efficient purification underpin its potential commercialization for industrial exploitation.

Aqueous two-phase systems: A simple methodology to obtain mixtures enriched in main toxins of Bothrops alternatus venom.

Phospholipase A2 (PLA2) and protease (P) are enzymes responsible of myotoxic, edematogenic and hemostasis disorder effects observed in the envenomation by Bothrops alternatus pitviper. Their partitioning coefficient (Kp) in different polyethyleneglycol/potassium phosphate aqueous two-phase systems (ATPSs) was determined in order to both achieve a better understanding of the partitioning mechanism and define optimal conditions for toxin isolation. Polyethyleneglycols (PEGs) of molecular weights 1000; 3350; 6000 and 8000; different temperatures (5, 20 and 37 °C) and phase volume ratios of 0.5; 1 and 2 were assayed. PLA2 partitioned preferentially to the top phase while P mainly distributed to the bottom phase. Either entropically- or enthalpically-driven mechanisms were involved in each case (PLA2 and P). The aqueous two-phase system formed by PEG of MW 3350 (12.20% wt/wt) and KPi pH 7.0 (11.82% wt/wt) with a volume ratio of one and a load of 1.25 mg of venom/g of system showed to be the most efficient to recover both enzymes. It allowed obtaining the 72% of PLA2 in the top phase with a purification factor of 2 and the 82% of P at the bottom phase simultaneously. A further adsorption batch step with DEAE-cellulose was used to remove satisfactorily the PEG from the top phase and recover the active PLA2. The proposed methodology is simple, inexpensive, and only requires professionals trained in handling basic laboratory equipment. It could be easily adoptable by developing countries in which the snakebite accidents cause considerable morbidity and mortality.

Fermentation of rice bran hydrolysate to ethanol using Zymomonas mobilis biofilm immobilization on DEAE-cellulose

Background The major challenges associated with the fermentation of lignocellulosic hydrolysates are the reduction in the operating cost and minimizing the complexity of the process. Zymomonas mobilis biofilm has been emerged to resolve these complexities. Biofilm has been reported to tolerate to the toxic inhibitors and easily manipulated toward the cell recycle through the cell immobilization. Results Z. mobilis ZM4 and TISTR 551 were able to develop biofilms on DEAE cellulose under the differences in the morphologies. Z. mobilis ZM4 developed homogeneous biofilm that brought DEAE fiber to be crosslinking, while Z. mobilis TISTR 551 developed heterogeneous biofilm in which crosslinking was not observed. Ethanol production under batch and repeated batch fermentation of rice bran hydrolysate containing toxic inhibitors were compared between these two biofilms. TISTR 551 biofilm produced the maximum yield (Y P/S) of 0.43 ± 0.09 g ethanol/g glucose (83.89% theoretical yield). However the repeated batch could not be proceeded due to the bacterial detachment. Z. mobilis ZM4 biofilm produced the maximum yield (Y P/S) of 0.177 ± 0.05 g ethanol/g glucose (34.74% theoretical yield) in the batch culture and the biofilm remained intact to proceed along the repeated batch. The highest ethanol yield (Y P/S) in the repeated batch of Z. mobilis ZM4 was 0.354 ± 0.07 g ethanol/g glucose (69.51% theoretical yield). Conclusions Homogeneous biofilm structure of Z. mobilis provided more recycle beneficial over the heterogeneous biofilm structure for the ethanol production from lignocellulosic hydrolysate.

Nanofiber adsorbents for high productivity continuous downstream processing.

An ever increasing focus is being placed on the manufacturing costs of biotherapeutics. The drive towards continuous processing offers one opportunity to address these costs through the advantages it offers. Continuous operation presents opportunities for real-time process monitoring and automated control with potential benefits including predictable product specification, reduced labour costs, and integration with other continuous processes. Specifically to chromatographic operations continuous processing presents an opportunity to use expensive media more efficiently while reducing their size and therefore cost. Here for the first time we show how a new adsorbent material (cellulosic nanofibers) having advantageous convective mass transfer properties can be combined with a high frequency simulated moving bed (SMB) design to provide superior productivity in a simple bioseparation. Electrospun polymeric nanofiber adsorbents offer an alternative ligand support surface for bioseparations. Their non-woven fiber structure with diameters in the sub-micron range creates a remarkably high surface area material that allows for rapid convective flow operations. A proof of concept study demonstrated the performance of an anion exchange nanofiber adsorbent based on criteria including flow and mass transfer properties, binding capacity, reproducibility and life-cycle performance. Binding capacities of the DEAE adsorbents were demonstrated to be 10mg/mL, this is indeed only a fraction of what is achievable from porous bead resins but in combination with a very high flowrate, the productivity of the nanofiber system is shown to be significant. Suitable packing into a flow distribution device has allowed for reproducible bind-elute operations at flowrates of 2,400 cm/h, many times greater than those used in typical beaded systems. These characteristics make them ideal candidates for operation in continuous chromatography systems. A SMB system was developed and optimised to demonstrate the productivity of nanofiber adsorbents through rapid bind-elute cycle times of 7s which resulted in a 15-fold increase in productivity compared with packed bed resins. Reproducible performance of BSA purification was demonstrated using a 2-component protein solution of BSA and cytochrome c. The SMB system exploits the advantageous convective mass transfer properties of nanofiber adsorbents to provide productivities much greater than those achievable with conventional chromatography media.